10 DIY Earring Holder Ideas to Keep Your Collection Tidy and Chic

Ever opened a drawer and found a tangled mess of earring backs, tiny hoops, and that one missing stud you swear you bought last month? It’s a tiny frustration that can ruin your morning. At Earring Elegance we love a good solution that looks pretty and works fast. Below are ten simple projects you can finish in an afternoon, using things you probably already have at home.

1. The Classic Cork Board

What you need

• A small cork board (or a slice of cork from a wine bottle)
• Push pins or thumbtacks
• A frame (optional)

How to do it

Cut the cork to the size you want, then stick it to the wall or the inside of a closet door. Push a pin through each earring’s post and let the backs hang on the other side. It looks like a tiny art gallery and you can move pieces around whenever you feel like a new look.

Why I love it: It’s cheap, it’s lightweight, and it adds a little texture to the wall. I’ve had friends ask where I got it, and I just point them to Earring Elegance for the idea.

2. The Mason Jar Magic

What you need

• A small mason jar with a lid
• A piece of fabric or felt
• Glue

How to do it

Cut a circle of fabric a little bigger than the jar’s opening. Glue it to the inside of the lid, then screw the lid on. Turn the jar upside‑down and slide your earrings onto the fabric. The fabric holds the posts while the backs sit in the jar’s bottom.

Pro tip: Use a bright fabric that matches your kitchen or bathroom décor – it becomes a cute countertop accessory.

3. The Vintage Teacup

What you need

• A small vintage teacup (or any small bowl)
• A piece of mesh or chicken wire
• Hot glue gun

How to do it

Stretch the mesh over the rim of the cup and glue it in place. The mesh acts like a tiny net where you can hook earrings. The cup itself adds a touch of shabby‑chic charm to any vanity.

My story: I found an old teacup at a thrift store and thought, “What if I could turn this into a holder?” After a quick glue job, it became my go‑to spot for my favorite studs.

4. The DIY Cardboard Grid

What you need

• A piece of sturdy cardboard
• A ruler and pen
• A craft knife
• Paint or washi tape (optional)

How to do it

Draw a grid of squares about 2 inches each. Cut out the squares, leaving a thin border around each. Paint or tape the grid for a pop of color. Slip each earring’s post into a square; the backs sit on the cardboard.

Why it works: You can make it as big or small as you need, and it’s easy to move around. I keep one on my nightstand for the earrings I wear most often.

5. The Repurposed Wine Rack

What you need

• A small wooden wine rack (the kind that holds 2‑4 bottles)
• Sandpaper (if needed)
• A coat of paint or stain

How to do it

If the rack has small holes for wine bottles, those holes are perfect for earring posts. Sand any rough edges, paint or stain to match your décor, and hang it on the wall. Each hole becomes a tiny earring slot.

Fun fact: The rack looks like a mini bookshelf for your jewelry – a tiny library of sparkle.

6. The Magnetic Strip

What you need

• A thin magnetic strip (like the kind used for knives)
• Small wooden board or canvas
• Screws or strong adhesive

How to do it

Attach the magnetic strip to the board, then mount the board on the wall. The metal backs of most earrings will stick to the magnet, keeping them upright and easy to see.

Caution: Not all earring backs are magnetic, but many are. Test a few before you commit.

7. The Upcycled Egg Carton

What you need

• A paper egg carton (the kind with 12 cups)
• Scissors
• Paint or decorative paper

How to do it

Cut the carton in half, then separate the individual cups. Paint or cover each cup with decorative paper. Glue the cups onto a board in a pattern you like. Slip each earring’s post into a cup; the back sits inside.

Why it’s cool: It’s a zero‑waste project and looks like a tiny garden of earring “flowers.”

8. The DIY Fabric Pocket

What you need

• A small piece of sturdy fabric (canvas works well)
• A ruler, pen, and sewing needle
• Thread

How to do it

Fold the fabric in half, then sew a series of small pockets along the edge – think of a tiny zip‑up pouch. Each pocket holds one pair of earrings. Hang the fabric strip on a hook or nail.

Personal note: I made one for my travel bag. It keeps my earrings safe while I’m on the road, and I can pull it out in seconds.

9. The Pegboard Panel

What you need

• A small pegboard (12×12 inches works fine)
• Peg hooks (the little metal ones)
• Paint (optional)

How to do it

Paint the pegboard if you want a pop of color, then attach it to the wall. Insert peg hooks where you want each earring to hang. The hooks hold the posts, and the backs dangle below.

Best part: You can rearrange the hooks whenever you get new pieces.

10. The Simple Wire Tree

What you need

• A piece of sturdy wire (coat hanger works)
• Pliers
• A small vase or pot for the base

How to do it

Straighten the wire, then bend it into a small “tree” shape with several branches. Secure the base in a vase or pot. Slip earring posts onto the branches; the backs hang down.

Why I love it: It looks like a tiny sculpture and adds a bit of industrial flair to a boho‑style room.

A Few Quick Tips from Earring Elegance

• Keep it light: Don’t overload any holder. A few earrings per spot keeps everything from getting tangled.
• Label if needed: If you have many similar pairs, a tiny sticky note on the holder can save you time.
• Mix and match: Feel free to combine two ideas – a cork board inside a painted mason jar, for example.

I hope one of these DIY ideas sparks a little joy in your jewelry routine. At Earring Elegance I’m always looking for ways to make everyday things a bit prettier, and I love sharing the tricks that work for me. Grab a cup of tea, pull out those craft supplies, and give your earrings a home they deserve.