---
title: How to Craft a Real‑Flower Resin Pendant in 5 Simple Steps (Beginner Friendly)
siteUrl: https://logzly.com/petalresin
author: petalresin (Petal Resin Creations)
date: 2026-06-18T06:00:34.918569
tags: [resin, diyjewelry, crafting]
url: https://logzly.com/petalresin/how-to-craft-a-realflower-resin-pendant-in-5-simple-steps-beginner-friendly
---


**Disclosure: We are reader supported, and earn affiliate commissions when you buy through us.**


If you’ve ever stared at a wilted bouquet and wished you could freeze its beauty forever, you’re not alone. I’ve turned that wish into a habit—pressing petals, sealing them in clear resin, and wearing a piece of garden on my neck. The good news? You don’t need a chemistry degree or a fancy studio. With a few [everyday supplies](https://www.amazon.com/s?k=Everyday+Supplies&tag=organizationtip101-20) and a pinch of patience, you can make a real‑flower resin pendant that looks like it was plucked from a fairytale. Let’s walk through the process together, step by step.

## What You’ll Need

Before we dive in, gather everything you’ll need. Having all the tools at hand keeps the flow smooth and saves you from frantic trips to the [hardware store](https://www.amazon.com/s?k=hardware+store&tag=organizationtip101-20).

- **[Fresh flowers](https://www.amazon.com/s?k=fresh+flowers&tag=organizationtip101-20) or foliage** – Choose small blooms like [baby's breath](https://www.amazon.com/s?k=Baby's+Breath&tag=organizationtip101-20), tiny daisies, or even a single rose petal. Bigger pieces can look heavy in a small pendant.
- **Pressing supplies** – [Heavy books](https://www.amazon.com/s?k=heavy+books&tag=organizationtip101-20), [parchment paper](https://www.amazon.com/s?k=Parchment+paper&tag=organizationtip101-20), and a clean [flat surface](https://www.amazon.com/s?k=flat+surface&tag=organizationtip101-20). A [flower press](https://www.amazon.com/s?k=flower+press&tag=organizationtip101-20) works great, but a simple book will do.
- **Resin kit** – Two‑part [epoxy resin](https://www.amazon.com/s?k=epoxy+resin&tag=organizationtip101-20) (clear, UV‑resistant) and a [measuring cup](https://www.amazon.com/s?k=measuring+cup&tag=organizationtip101-20). Most kits come with a [mixing stick](https://www.amazon.com/s?k=Mixing+stick&tag=organizationtip101-20).
- **Mold** – Silicone pendant molds are flexible and release easily. A 25 mm round mold is a good starter size.
- **[Protective gear](https://www.amazon.com/s?k=protective+gear&tag=organizationtip101-20)** – [Nitrile gloves](https://www.amazon.com/s?k=nitrile+gloves&tag=organizationtip101-20), a mask, and a well‑[ventilated workspace](https://www.amazon.com/s?k=Ventilated+Workspace&tag=organizationtip101-20). Resin smells a bit like plastic; you’ll thank yourself for the mask later.
- **Finishing tools** – [Fine sandpaper](https://www.amazon.com/s?k=Fine+Sandpaper&tag=organizationtip101-20) (400‑800 grit), a [polishing cloth](https://www.amazon.com/s?k=polishing+cloth&tag=organizationtip101-20), and a small drill or [jewelry findings](https://www.amazon.com/s?k=jewelry+findings&tag=organizationtip101-20) for the jump ring.

If you enjoy turning pressed blossoms into jewelry, you might also like our guide to crafting [DIY pressed‑flower resin earrings](/petalresin/diy-pressedflower-resin-earrings-from-fresh-blooms-to-finished-jewelry) for a pair of delicate accessories.

## Step 1 – Choose and Press Your Flowers

The magic of a real‑flower pendant starts with the flowers themselves. Pick blooms that are fully open and free of excess moisture. I love using wildflowers I pick on a Sunday walk; they bring a bit of the outdoors into my studio.

1. **Trim** each flower to fit the mold. Aim for pieces no larger than 1 cm in any direction.
2. **Arrange** the petals on a piece of parchment paper, spacing them so they won’t overlap when pressed.
3. **Cover** with another sheet of parchment and place a [heavy book](https://www.amazon.com/s?k=heavy+book&tag=organizationtip101-20) on top. Let them sit for 24‑48 hours. The longer you press, the flatter and clearer the petals become.
4. **Check** the result. If the flowers are still a bit damp, give them another day. Dry petals will stay crisp inside the resin.

*Pro tip:* If you’re in a hurry, a microwave flower press can speed things up, but I prefer the gentle patience of a book. It feels like I’m giving the flowers a quiet nap.

## Step 2 – Prepare Your Workspace and Mix the Resin

Resin works best at [room temperature](https://www.amazon.com/s?k=room+temperature&tag=organizationtip101-20) (around 70 °F). Warm it up a bit if your studio is chilly; cold resin stays thick and bubbles more.

1. **Cover** your [work surface](https://www.amazon.com/s?k=work+surface&tag=organizationtip101-20) with a silicone mat or [wax paper](https://www.amazon.com/s?k=Wax+paper&tag=organizationtip101-20). This keeps spills easy to clean.
2. **Measure** the resin and hardener in the exact ratio the kit specifies—usually 1:1 by volume. Use separate cups for each component.
3. **Combine** the two parts in a clean mixing cup. Stir slowly with [a wooden stick](https://www.amazon.com/s?k=a+wooden+stick&tag=organizationtip101-20), scraping the sides and bottom. Stir for about 3‑4 minutes; this ensures a proper cure.
4. **Watch for bubbles.** If you see a lot, let the mixture sit for a minute; bubbles will rise to the surface.

*Personal note:* My first batch had a few stubborn bubbles that looked like tiny pearls. I learned to tap the cup gently on the table and then use a small torch to pop them. A quick pass with a [kitchen torch](https://www.amazon.com/s?k=kitchen+torch&tag=organizationtip101-20) works wonders—just keep it moving.

If you’d rather create a piece you can wear close to the heart, explore our tutorial on a [hand‑stitched pressed‑flower resin necklace](/petalresin/create-a-handstitched-pressedflower-resin-necklace-a-stepbystep-guide-for-beginners) for a different style of floral jewelry.

## Step 3 – Create the [Base Layer](https://www.amazon.com/s?k=base+layer&tag=organizationtip101-20)

A thin base layer helps the [pressed flowers](https://www.amazon.com/s?k=pressed+flowers&tag=organizationtip101-20) sit flat and prevents them from floating to the top.

1. **Pour** a small amount of mixed resin into the [silicone mold](https://www.amazon.com/s?k=silicone+mold&tag=organizationtip101-20)—just enough to cover the bottom (about 1 mm deep).
2. **Tilt** the mold gently to spread the resin evenly.
3. **Let** it sit for 10‑15 minutes until it becomes tacky. You’ll know it’s ready when a fingertip leaves a faint imprint.

## Step 4 – Arrange the Flowers and Seal

Now the fun part—placing your pressed petals where you want them.

1. **Pick up** each flower with tweezers. Position them on the tacky base layer. I like to create a loose, natural look rather than a perfect symmetry; it feels more like a real garden.
2. **Add a few extra touches** like tiny bits of dried leaf or a speck of [gold leaf](https://www.amazon.com/s?k=gold+leaf&tag=organizationtip101-20) for sparkle.
3. **Cover** the arrangement with the remaining resin. Pour slowly to avoid trapping air. Fill the mold just to the top, leaving a tiny gap for the finishing layer later.
4. **Remove bubbles** by gently tapping the mold on the table or using a straw to blow them out.

## Step 5 – Cure, Finish, and Wear

Patience is the final ingredient. Resin needs time to harden fully.

1. **Cover** the mold with a [cardboard box](https://www.amazon.com/s?k=cardboard+box&tag=organizationtip101-20) or a piece of glass to keep dust away. Let it cure for 24‑48 hours, depending on the kit’s instructions.
2. **Demold** the pendant carefully. The silicone should release easily; if it sticks, flex the mold a little more.
3. **Sand** any rough edges with fine sandpaper. Start with 400 grit and finish with 800 grit for a smooth feel.
4. **Polish** the surface using [a soft cloth](https://www.amazon.com/s?k=A+soft+cloth&tag=organizationtip101-20). If you want extra shine, a tiny dab of jewelry [polishing compound](https://www.amazon.com/s?k=Polishing+compound&tag=organizationtip101-20) works well.
5. **Attach** a jump ring through the drilled hole (most molds have a small pre‑drilled opening). Close the ring with pliers, and your pendant is ready to wear.

*Final thought:* The first time I wore a pendant made from a single pink wildflower, I felt like I was carrying a secret piece of spring on my chest. It’s a tiny reminder that beauty can be captured, preserved, and shared.

---