Create a Boho Plant Hanger in 30 Minutes

If you have a tiny balcony, a narrow window sill or just a little corner that needs a splash of green, a quick macramé plant hanger can be the perfect fix. In this post I walk you through a simple, no‑stress project that you can finish in half an hour. It’s the kind of thing I love sharing on Knot & Knot because it proves that beautiful décor doesn’t have to be complicated.

What You’ll Need

Materials

3 mm cotton macramé cord (about 50 meters total) – I like the natural undyed look for a boho vibe.
A wooden or metal ring, 2‑3 inches in diameter. This will be the anchor for your hanger.
Scissors
A tape measure or ruler
A small pot with a drainage hole (the pot is not part of the hanger but it helps you gauge length).

Tools

You really only need your hands. A clipboard or a piece of cardboard can help you keep the cord organized while you work, but it’s optional.

Basic Knots You Should Know

If you’ve ever browsed Knot & Knot, you’ll recognize the two knots we’ll use most: the Lark’s Head and the Square Knot. Both are beginner friendly and forgiving.

Lark’s Head

Fold the cord in half to make a loop.
Place the loop behind the ring.
Pull the two loose ends through the loop and tighten.

Square Knot

Take two cords, label them left and right.
Cross the left over the right and bring the left under the right.
Loop the left under the two standing cords and pull tight.
Now reverse: cross the right over the left, bring the right under the left, loop the right under the standing cords and tighten.
The knot should look symmetrical. It’s called a “square” because of the shape the cords make.

Practice these a couple of times and you’ll be ready to move on.

Step by Step Build

1. Prepare Your Base

Cut six lengths of cord, each about 120 cm long. Fold each in half and attach them to the ring using a Lark’s Head. You should now have twelve working strands hanging down from the ring.

2. Create the First Row of Square Knots

Divide the twelve strands into three groups of four. Working with the first group, take the two outermost strands and make a square knot. Then do the same with the two inner strands. You will end up with two square knots side by side, leaving a small gap between them. Repeat this with the other two groups. When you’re done, you’ll have three sets of double square knots, each set spaced evenly around the ring.

3. Form the Second Row

Now you’ll work with the cords between the knots you just made. Take the two cords that are directly under each double knot and tie another square knot. This creates a “ladder rung” that will hold the pot later. Do this for each of the three sections. You should now see a simple three‑panel net.

4. Add a Cushion for the Pot

Cut three new pieces of cord, each about 30 cm long. Fold them in half and attach them to the center of each panel using a Lark’s Head. Pull the loose ends down and tie a square knot about 10 cm below the ring. This creates a small loop that will give the hanger a little extra width and support for the pot.

5. Finish the Bottom

Decide how long you want the hanger to be. A good rule of thumb is to measure from the top of the pot to where you want the bottom of the cords to sit – usually 40‑50 cm lower than the ring works well for most small pots. Trim all cords to the same length, leaving a little extra for fringe if you like.

Gather all the cords together at the bottom, gather them into a neat bundle, and tie a final knot about 2 cm from the ends. Trim the excess cord, leaving a fringe of about 5 cm if you want a boho touch.

6. Insert Your Plant

Slide your small pot into the middle of the net, making sure the drainage hole is facing down. Adjust the cords so the pot sits evenly. If the hanger feels a bit loose, you can add an extra square knot near the bottom for extra grip.

Tips for Small Spaces

Keep it Light: Use thin cord and a small ring to avoid a bulky look.
Vertical Height: Hang the plant about 2‑3 feet above the floor or countertop to free up space.
Layering: If you have more than one small pot, make a second hanger of the same size and hang them side by side for a mini garden wall.
Mix Materials: Add a single jute rope or a thin leather strip to the bottom fringe for texture without adding weight.

Why This Works for Tiny Rooms

The whole point of this project is simplicity. By limiting the design to three panels and a few basic knots, you spend less time tying and more time enjoying the greenery. The netted structure also allows air to flow around the pot, which is a nice bonus for plant health.

At Knot & Knot we love sharing projects that feel doable on a weeknight. This boho plant hanger fits that bill perfectly – it’s quick, affordable, and the result looks like something you’d find in a boutique shop.

Give it a try tonight. Pull out a piece of cord, fire up your favorite playlist, and watch a small corner of your home transform in just thirty minutes.