--- title: Step-by-Step Guide to Building a Silent 60% Keyboard siteUrl: https://logzly.com/keyclicks author: keyclicks (KeyClicks) date: 2026-06-18T02:34:11.128665 tags: [mechanical, keyboard, diy] url: https://logzly.com/keyclicks/step-by-step-guide-to-building-a-silent-60-keyboard --- **Disclosure: We are reader supported, and earn affiliate commissions when you buy through us.** If you’ve ever winced at the clack of a keyboard while trying to focus in a quiet cafe or late‑night gaming session, you know the appeal of a board that stays whisper‑quiet. Building your own [silent 60% keyboard](/keyclicks/diy-60-silent-keyboard-build-from-pcb-to-artisan-keycaps-in-5-simple-steps) lets you keep the compact layout you love, choose parts that fit your budget, and add a personal touch that pre‑built boards just can’t match. Below is the exact walk‑through I followed, with the parts I picked and the little tricks that made the build truly silent. ## Why a Silent 60%? A 60% board ditches the function row, nav cluster, and numpad, giving you more [desk space](https://www.amazon.com/s?k=desk+space&tag=organizationtip101-20) and forcing you to work with layers – great for minimalists and frequent desk‑hoppers. The “silent” part comes from using dampened switches, a well‑lubed stabilizer setup, and a bit of foam inside the case. Together they turn the usual “thock” into a soft tap that won’t startle coworkers, roommates, or even your cat. ## Parts List All of these items are easy to find from mainstream retailers or budget‑friendly Asian sites. Prices are rough USD averages from mid‑2026. - **Case** – 60% acrylic or polycarbonate, 30 mm thick, with a [rubber gasket](https://www.amazon.com/s?k=rubber+gasket&tag=organizationtip101-20). Example: KBDFans Tofu 60% – $25. - **PCB** – Hot‑swap, QMK‑compatible, 2‑U mounting holes. Example: DZ60RGB‑V2 – $20. - **Plate** – Brass or polycarbonate. I went with polycarbonate for $12 (lighter and cheaper). - **Switches** – [Silent linear switches](/keyclicks/how-to-choose-the-perfect-switch-for-your-typing-style-a-stepbystep-guide) – Gateron Silent Red at $0.45 each. - **Keycaps** – PBT double‑shot, 60% layout, [full coverage](https://www.amazon.com/s?k=Full+Coverage&tag=organizationtip101-20). YMDK SA‑PBT – $30. - **Stabilizers** – PCB‑mount Cherry‑style, pre‑lubed if possible. Durock V2 – $8 for a set. - **Tools** – Switch puller, keycap puller, tweezers, small [screwdriver set](https://www.amazon.com/s?k=Screwdriver+Set&tag=organizationtip101-20) – $10 total. - **Lubricant** – Thin Krytox 205g0 for switches, dielectric grease for stabilizers – $12. - **Foam** – Thin EVA sheet (2 mm) for vibration damping – $5. Total cost lands around $150, well under the $250 you’d usually pay for a ready‑made silent 60%. ## Preparing the Switches ### Open the Switches Even silent switches gain from a light lube. Use a switch opener (or a small [flathead screwdriver](https://www.amazon.com/s?k=flathead+screwdriver&tag=organizationtip101-20)) to split the housing. Work gently – the plastic can crack if you force it. ### Lube the Internals Apply a thin coat of Krytox 205g0 to the spring, the leaf (if present), and the housing sliders. A tiny brush works best; a single dab is enough. Over‑lubing makes the switch feel mushy and kills the smooth linear feel. ### Reassemble Snap the housing back together. You’ll notice a softer thud when you press the switch. Repeat for all 61 switches (including the extra for the spacebar if you use a larger stabilizer). ## Stabilizer Treatment Stabilizers are often the biggest source of rattles on a 60% board. Here’s my quick routine: 1. **Clip** the plastic legs off the stabilizer housing. This shortens travel and removes the bottom‑out clack. 2. **Lubricate** the stabilizer housing with a thin layer of dielectric grease. A tiny dab on each contact point does the job. 3. **Add foam** – cut a small piece from the EVA sheet and place it between the PCB and the case under the larger stabilizers (spacebar, shift, enter). This extra cushion mutes any leftover ping. ## Assembling the Board ### Install the Plate Lay the plate onto the PCB, lining up the [screw holes](https://www.amazon.com/s?k=screw+holes&tag=organizationtip101-20). If you chose brass you’ll feel a nice weight right away. ### Mount the Switches Because the PCB is hot‑swap, simply push each lubed switch into its socket. Give each a quick visual check to make sure the pins are fully seated. ### Add Foam and Gasket Cut the [EVA foam](https://www.amazon.com/s?k=EVA+foam&tag=organizationtip101-20) to fit the interior of the case. Lay it on the bottom before inserting the PCB‑plate combo. Then install the rubber gasket around the case’s edges. This combo is what gives the board its silent character. ### Screw Everything Down Use the supplied M2 screws to secure the plate to the PCB, then the PCB to the case. Tighten evenly – overtightening can warp the case or strip threads. ### Pop on the Keycaps Start with the larger keys (space, enter, shift) and work outward. Aligning the legends on the SA‑style caps is my favorite part; they give the board a vintage vibe that makes me smile every time I type. ## Firmware and Testing The DZ60RGB‑V2 PCB runs QMK, a free, open‑source firmware. Plug the board into your computer, open QMK Configurator, and flash the default layout. From there you can add a silent layer that disables any audible feedback on the Fn key, or set up macros for your favorite shortcuts. If you’re still deciding on the right switch, see our guide on the [ideal tactile switch](/keyclicks/choosing-the-ideal-tactile-switch-a-practical-guide-for-custom-keyboard-builders). After flashing, test each key with a simple “key tester” website. Listen for rattles – if you hear one, double‑check the stabilizer lubrication or add a bit more foam. My build ended up so quiet that even my cat didn’t flinch when I typed a full paragraph. ## Final Thoughts Building a silent 60% keyboard isn’t a marathon; it’s a weekend project that pays off in desk real‑estate and [peace of mind](https://www.amazon.com/s?k=Peace+of+Mind&tag=organizationtip101-20). By picking affordable parts you skip the premium [price tag](https://www.amazon.com/s?k=price+tag&tag=organizationtip101-20) while still getting a solid feel and a quiet typing experience. The biggest win is the personal touch – you know exactly what’s inside, and you can tweak it whenever you like. If you’re new to keyboard building, start with the parts list above and follow each step methodically. Don’t rush the lubrication; a little patience now saves you from noisy keys later. And remember, the joy of a silent board isn’t just in the quiet – it’s in the satisfaction of having built something that’s truly yours.