---
title: Clear Resin Keychain with Pressed Flowers – Step‑by‑Step Guide
siteUrl: https://logzly.com/keychaincreations
author: keychaincreations (Keychain Creations)
date: 2026-07-14T11:00:40.700902
tags: [resincraft, pressedflowers, handmade]
url: https://logzly.com/keychaincreations/clear-resin-keychain-with-pressed-flowers-stepbystep-guide
---


Turn wilted‑looking petals into a **crystal‑clear resin keychain** in minutes. If your last attempt ended with a milky haze or stubborn bubbles, this guide shows exactly how to dry, mix, and cure so the flowers stay vibrant and the resin stays flawless. Follow the concise steps below and you’ll have a professional‑looking keychain ready to wear or gift.

## Why Resin Gets Cloudy (and How to Stop It)

Moisture, rushed mixing, and temperature swings are the three biggest culprits behind a cloudy finish.

- **Moisture in the flowers** – Even dry‑to‑the‑touch petals hold hidden water that reacts with resin.  
- **Improper mixing** – Fast, vigorous stirring traps air that later appears as foggy spots.  
- **Cold workspace** – Low temperatures cause the resin to cure unevenly, sealing tiny droplets inside.

**Fixes that work every time**

1. **Dry the flowers longer** – Store pressed petals in a sealed bag with silica gel for at least one week.  
2. **Measure and stir carefully** – Use a digital scale for a precise 1:1 resin‑hardener ratio, let the mixture sit 30 seconds, then stir slowly in a figure‑eight for two minutes.  
3. **Warm the workspace** – Keep the room around 21 °C (70 °F) so the resin stays fluid longer and bubbles can rise and pop naturally.

Applying these three adjustments eliminates the fog and gives you a **glass‑like finish**.

## Step‑by‑Step Bubble‑Free Resin Keychain

### 1. Gather Your Supplies
- Clear epoxy resin + matching hardener (1:1 bottle)  
- Pressed flowers dried ≥ 1 week (silica‑gel sealed)  
- Silicone keychain mold with opening for the metal ring  
- Metal key ring, jump ring, and pliers  
- Mixing cups, wooden stir sticks, digital scale (or spoons)  
- Kitchen torch **(optional, for surface bubbles)**  

### 2. Prep the Mold
Wipe the silicone mold with a paper towel. For extra shine, mist a light coat of hair spray, wait a few seconds, then let it dry. This creates a thin barrier that helps bubbles escape later.

### 3. Mix the Resin
Weigh 100 g resin and 100 g hardener. Pour resin first, then hardener, and let sit 30 seconds. Stir slowly in a figure‑eight, scraping the sides and bottom. **Do not whisk**; a gentle motion releases trapped air.

### 4. Position the Flowers
Lay a few dried petals at the bottom of the mold. For a layered look, pour a thin resin layer, let it sit 1 minute, add more petals, then pour the final layer. This prevents the flowers from floating to the surface.

### 5. Pour the Resin
Tilt the cup and **slowly pour** the mixture over the petals, stopping just below the mold’s rim. Tap the mold lightly on the table to coax any rising bubbles upward.

### 6. Pop Surface Bubbles
Pass a kitchen torch quickly over the surface, keeping it moving to avoid scorching the silicone. The heat instantly bursts tiny bubbles. No torch? A gentle shake of the mold can also release them, though the torch yields the cleanest result.

### 7. Cure Undisturbed
Cover the mold with a cardboard box or foil to keep dust out. Let it cure for 4‑6 hours in a warm, still area. Consistent warmth is key to a **bubble‑free keychain**.

### 8. Demold and Finish
When the piece feels solid, push it out of the mold. Sand any sharp edges with fine‑grit sandpaper, attach the metal key ring using a jump ring and pliers, then polish with a soft cloth.

### 9. Optional Protective Coat
For extra shine and durability, brush a thin layer of clear resin over the finished keychain and let it cure again. This step is optional but adds a glossy, long‑lasting finish.

## Quick Recap

- **Dry** flowers for ≥ 1 week with silica gel.  
- **Measure** resin and hardener precisely; stir slowly.  
- **Warm** your workspace to keep resin fluid longer.  
- **Pour** gently, tap out bubbles, and use a torch for a flawless surface.  

Follow these actions and every resin keychain you make will showcase **vibrant, crystal‑clear pressed flowers**—no more cloudy mishaps.

Enjoy crafting, and feel free to share this guide with fellow makers. For more DIY breakthroughs, subscribe to the Handmade Haven newsletter. Happy resin‑working!