---
title: Mount Helmet Camera for Stable Footage: Rubber Washer Trick
siteUrl: https://logzly.com/helmetcamrider
author: helmetcamrider (HelmetCam Rider)
date: 2026-07-07T13:01:13.465160
tags: [helmetcam, rubberwasher, motorcycle]
url: https://logzly.com/helmetcamrider/mount-helmet-camera-for-stable-footage-rubber-washer-trick
---


Struggling with shaky helmet cam footage? Learn how to mount helmet camera for stable footage using a rubber washer, lock‑nut, and zip‑tie — no fancy gear needed.

The issue isn’t the camera itself; it’s how it’s attached to your helmet. When I first used a cheap mount, the footage looked fine on the tiny screen but bounced and jiggled on playback. Tightening screws, adding padding, or repositioning the camera didn’t stop the vibration from the engine and road from sneaking in.

The mount was resonating with the bike’s frequency, turning tiny shakes into noticeable wobbles. I realized I needed a solution that actually dampened vibration rather than just holding the camera tighter.

The fix uses three inexpensive items you likely already have: a **rubber washer**, a **lock‑nut**, and a short **zip‑tie**. Together they absorb high‑frequency buzz, prevent loosening, and eliminate tiny play.

First, remove the original mount and place a thin **rubber washer** between the camera’s base and the mount plate. The washer acts as a mini shock absorber, soaking up the vibrations that travel up from the helmet.

Next, reinstall the mount using a **lock‑nut** instead of a regular nut. The nylon insert grips the bolt and stops it from loosening over time, keeping the washer firmly in place and preventing drift.

Finally, loop a small **zip‑tie** around the bolt head and the mount arm, pulling it snug but not overtight. This adds extra tension that stops any microscopic play from developing.

I’ve been using this setup for months, and the difference is **night and day**. The footage stays steady even on rough pavement, and I no longer need to check bolts before each ride.

For anyone seeking the **best way to attach helmet camera without vibration**, this method is cheap, reversible, and requires no special tools. It works great as **helmet camera mounting tips for motorcycle riders** who want clear shots without the jello effect. Give it a try and you’ll notice how much easier it is to **reduce helmet camera shake while riding**—your clips will look smooth enough to share right away.

In short, a rubber washer, a lock‑nut, and a zip‑tie can turn a shaky helmet cam into a steady storyteller. It’s a tiny tweak that makes your rides look professional without costing much. If you found this helpful, consider sharing the tip with a buddy who could use clearer footage. Enjoy the ride and the smooth video that comes with it.---