---
title: Cedar Bird Feeder with Built‑In Squirrel Guard
siteUrl: https://logzly.com/featheredfriendsdiy
author: featheredfriendsdiy (Feathered Friends DIY)
date: 2026-06-30T21:01:38.916732
tags: [birdfeeders, diy, wildlife]
url: https://logzly.com/featheredfriendsdiy/cedar-bird-feeder-with-builtin-squirrel-guard
---


Ever stare at a squirrel stealing your birdseed and think *enough is enough*? I felt the same until I built a cedar feeder that keeps the critters out and the birds happy. Below is the exact step‑by‑step guide I use at Feathered Friends DIY, so you can get a quiet garden without the constant chase.

## Why a Squirrel Guard Matters

Squirrels are clever, fast and fearless. They’ll gnaw through flimsy wire or bounce off flimsy platforms, leaving you with empty seed trays and a lot of wasted money. A well‑designed guard does three things:

1. **Blocks access** – the guard’s over‑hang stops squirrels from climbing onto the feeder.
2. **Adds weight** – a heavy cedar base keeps the whole thing stable when a squirrel tries to tip it.
3. **Looks natural** – cedar blends into any garden and resists rot, so you get durability without an eyesore.

## Materials You’ll Need

### Wood and Tools

- 1 × 6 cedar board, 12 in long (for the base)  
- 1 × 4 cedar board, 10 in long (for the perch)  
- 1 × 2 cedar board, 8 in long (for the guard lip)  
- 1 × 1 cedar board, 6 in long (for the guard side)  
- 1 × 2 pine board, 6 in long (for the seed box)  
- 1/4 in galvanized nails or wood screws  
- Drill with 1/8 in bit  
- Saw (hand or circular)  
- Sandpaper (120 grit)  
- Outdoor wood glue  
- Non‑toxic exterior sealant (optional)  

### Squirrel Guard Parts

- 1/2 in metal rod, 12 in long (acts as a stiff guard pole)  
- 1 / 8 in hardware cloth, 6 × 6 in piece (optional extra barrier)  

All the cedar pieces can be bought at your local lumber yard. I like to pick the straightest boards because they make the joints tighter.

## Step 1: Cut and Prepare the Cedar

1. Measure and mark your cuts on the boards.  
2. Saw the 1 × 6 into a 12‑in base, the 1 × 4 into a 10‑in perch, and the 1 × 2 into a 6‑in guard lip.  
3. Cut the 1 × 1 into two 6‑in side pieces – these will form the guard’s “walls.”  
4. Sand every edge until it’s smooth. Rough wood can splinter birds’ feet and makes sealing harder.

## Step 2: Assemble the Base and Perches

1. Lay the 12‑in base flat. Apply a thin line of wood glue along the top edge, then attach the 10‑in perch with two nails or screws, centered lengthwise.  
2. Flip the assembly over and glue the 6‑in pine board to the underside of the base. This pine piece becomes the seed compartment. Drill two 1/8 in holes through the base into the pine so the seed can fall into the box when birds perch.  
3. Secure the pine board with a few nails from the underside. The box should sit flush with the base, forming a shallow trough.

## Step 3: Build the Squirrel Guard

1. Take the two 6‑in side pieces (1 × 1) and attach them vertically to the back edge of the base using two nails each. They should stand upright, forming a “U” shape.  
2. Slide the 6‑in guard lip (1 × 2) across the top of the two sides, creating a roof over the seed box. Nail it in place.  
3. Insert the 1/2 in metal rod through the center of the guard lip and into the base. This rod adds rigidity and makes it hard for a squirrel to push the guard aside. Tighten a small washer on each end if you have them.  
4. (Optional) If you want extra protection, staple a piece of hardware cloth to the inside of the guard, covering the opening where birds feed. The cloth should be tight enough to stop a squirrel’s claws but loose enough for seed to fall through.

## Step 4: Finishing Touches

1. Sand any rough nail heads and wipe the feeder with a dry cloth.  
2. If you like a bit of color, brush a coat of non‑toxic exterior sealant. This isn’t required – cedar looks great natural and already resists rot.  
3. Let the sealant dry for at least 24 hours before loading seed.

## Hanging and Placement Tips

- **Choose a sturdy branch** about 5‑ft off the ground. A branch with a slight upward tilt helps keep squirrels from climbing up.  
- **Use a strong rope or metal chain** to hang the feeder from the branch. Tie a secure knot – a double bowline works well.  
- **Face the guard away from the tree** so squirrels have to go around the trunk to reach it.  
- **Add a nearby perch** for birds to rest before hopping onto the feeder. A simple cedar twig nailed near the feeder does the trick.

## Quick Troubleshooting

| Problem | Simple Fix |
|---------|------------|
| Squirrels still manage to climb | Add a second metal rod across the guard’s front, creating a “X” shape that blocks climbing. |
| Seed spills out too fast | Raise the seed box a bit by adding a thin spacer under the pine board. |
| Birds seem hesitant | Make sure the guard lip isn’t too low; a 1‑in clearance works for most small songbirds. |
| Feeder sways in wind | Attach a second rope to a nearby branch for extra stability. |

That’s it! In under an hour you’ll have a sturdy cedar feeder that gives squirrels the boot and invites hummingbirds, finches, and chickadees to your garden. I built this one for my own backyard, and it’s been a hit for months now. Feel free to tweak the dimensions to suit the space you have – the basic design works at any scale.

If you try this project, drop a comment on Feathered Friends DIY and let us know how it turned out. I love hearing about the different birds that show up and any clever squirrel‑proof tweaks you discover. Happy building, and may your garden stay peaceful and feather‑filled!