---
title: Designing Custom Collars for 3D-Printed Assemblies: Step-by-Step Techniques
siteUrl: https://logzly.com/couplinghub
author: couplinghub (Coupling & Collar Hub)
date: 2026-06-15T20:35:12.059332
tags: [3dprinting, customcollars, mechanicaldesign]
url: https://logzly.com/couplinghub/designing-custom-collars-for-3d-printed-assemblies-step-by-step-techniques
---


Ever tried to bolt two 3‑D printed parts together only to find the joint slipping or the screw pulling out? I’ve been there, and the fix is often a well‑designed collar. A good collar turns a flimsy plastic shaft into a sturdy, load‑bearing member. In today’s post I’ll walk you through a practical, hands‑on method for designing custom collars that actually work, whether you’re building a hobby robot or a small‑scale production part.

## Why a Collar Matters in 3D Prints

A collar is a ring‑shaped fastener that slides onto a shaft and is then secured with a set screw, pin, or clamp. In metal design the idea is ancient, but in 3‑D printing it becomes a lifesaver because printed shafts rarely have the same strength or surface finish as machined steel. A collar does three things:

* **Transfers load** – It spreads the force from a screw or bearing over a larger area of the shaft.
* **Prevents axial movement** – The set screw bites into the plastic, stopping the shaft from sliding out.
* **Provides a mounting point** – You can bolt other parts to the collar instead of the weak shaft itself.

Without a collar, you’re asking a printed part to do the work of a forged steel rod, and that rarely ends well.

## Gather Your Tools and Data

Before you open any CAD file, collect the basics:

| Item | Why You Need It |
|------|-----------------|
| Printed shaft dimensions (diameter, length, tolerance) | Determines how tight the collar must fit |
| Expected load (axial, radial, torque) | Guides material thickness and set‑screw size |
| Material data (PLA, PETG, Nylon) | Affects strength and how much you can rely on the set screw |
| CAD software (Fusion 360, FreeCAD, Onshape) | Where you’ll model the collar |
| 3‑D printer with enough build volume | To actually print the part |

I keep a small spreadsheet for each project – it’s a habit from my engineering days that saves a lot of back‑and‑forth later.

## Step 1 – Define the Load Path

First, ask yourself: *What forces will this joint see?* If the shaft only carries a light sensor, a thin collar may be enough. If it drives a gear or holds a motor, you need a robust design.

A quick rule of thumb: the collar’s wall thickness should be at least 1.5 times the shaft’s diameter for [high‑torque applications](/couplinghub/how-to-choose-the-right-coupling-for-hightorque-applications-a-practical-guide-for-engineers). For low‑load cases, 0.8‑times the diameter works fine. Write the numbers down; they will become the key dimensions in the next step.

## Step 2 – Sketch the Basic Shape

Open your CAD program and draw a simple ring that matches the shaft diameter. Use a **clearance fit** – typically 0.1 mm larger than the printed shaft for PLA, a bit more for PETG because it shrinks slightly when cooling.

Example: If your shaft is 12 mm, draw a 12.1 mm inner diameter (ID). The outer diameter (OD) is then ID plus twice the wall thickness you chose in Step 1. So for a 12 mm shaft with a 1.5× thickness rule (18 mm wall), the OD becomes 12.1 mm + 2 × 18 mm = 48.1 mm.

Keep the collar length a little longer than the set‑screw engagement zone – about 10 mm is a comfortable default.

## Step 3 – Add the Set‑Screw Feature

The set screw is the little knob that bites into the shaft. Here’s a simple way to model it:

1. **Create a pocket** on the inner face of the collar where the screw will sit. A 4 mm deep, 3 mm wide slot works for M3 screws.
2. **Add a counterbore** at the end of the slot to house the screw head. A 5 mm diameter, 2 mm deep pocket is enough for a pan head.
3. **Draft a small chamfer** (0.5 mm) on the slot entry to guide the screw in.

If you prefer a set pin instead of a screw, just drill a 2 mm hole through the collar wall and plan to insert a metal dowel later.

## Step 4 – Reinforce Critical Areas

Printed plastic can be surprisingly strong, but stress concentrates at sharp corners. Add fillets (rounded edges) of at least 1 mm radius around the slot and the inner edge of the collar. This spreads the load and reduces the chance of cracking.

For extra stiffness, consider a **rib** that runs around the outer circumference. A 2 mm high, 1 mm thick rib spaced every 30 mm adds a lot of rigidity without much extra material. You can also review our [durable collar assembly tips](/couplinghub/designing-durable-collar-assemblies-tips-and-best-practices-for-hobbyists-and-professionals) for additional reinforcement strategies.

## Step 5 – Choose the Right Print Settings

Even the best CAD model can fail if printed poorly. Follow these guidelines:

* **Layer height:** 0.2 mm for a good balance of speed and strength.
* **Infill:** 50 % for high‑load collars; 30 % may suffice for light duty.
* **Print orientation:** Print the collar standing up (axis of the ring vertical). This aligns the layers with the load direction and gives the strongest bond.
* **Wall count:** At least 3 per side; more if you’re using a thin wall design.
* **Cooling:** Reduce fan speed for the first few layers to avoid warping.

I always do a quick test print of a small section (just the set‑screw pocket) to verify that the screw threads correctly before committing to the full part.

## Step 6 – Post‑Process and Test

Once printed, clean up any support marks with a hobby knife. If you used a filament that benefits from annealing (like Nylon), bake the collar at 80 °C for an hour to improve strength.

Now slide the collar onto the shaft. You should feel a slight drag – that’s the clearance fit working. Tighten the set screw just enough to bite into the plastic; over‑tightening can strip the shaft, especially in softer materials.

Give the assembly a gentle pull test. If it holds, you’re good to go. If it slips, check the clearance (maybe the shaft is a bit larger than measured) and adjust the ID in the CAD model by 0.05 mm increments.

## A Quick Anecdote

The first time I tried this on a hobby drone arm, I printed the collar with a 0.2 mm wall thinking “thin is light”. The arm flexed under a modest prop load and the set screw cut a clean groove right through the shaft. After a night of redesign (adding the rib and bumping the wall to 2 mm) the new collar survived a full flight without a hitch. The lesson? In 3‑D printed fasteners, a little extra material goes a long way.

## Wrap‑Up Thoughts

Designing a custom collar for a 3‑D printed assembly is not rocket science, but it does need a bit of forethought. By defining the load, giving the collar a proper fit, adding a set‑screw pocket, reinforcing stress points, and printing with the right settings, you turn a fragile plastic shaft into a reliable mechanical link.

Next time you face a slipping joint, remember the simple steps laid out here. A well‑designed collar can save you hours of re‑printing and a lot of frustration.